Kanban Logistics

APRIL 17, 2023

During periods of growth, manufacturers of all sizes tend to come to the same realization: they’ve run out of space for equipment and people and need to expand. In this article, we’ll examine JIT in detail, explain how a 3PL can help you take advantage of it, and discuss how JIT is still relevant post-pandemic. This took up (i.e.,

Manufacturing Procurement 52

Manufacturing Procurement Supply Chain Planning Software Modeling Software Material Savings 52

The Logistics & Supply Chain Management Society

APRIL 15, 2021

The impact was across manufacturing plants, transport networks, warehouses, and retail outlets. Our analysis of digital and non-digital manufacturers over time shows an index of profit performance, with digital manufacturers outpacing their peers (Figure 1). Source: IDC 2021—Digital Analysis: Manufacturing.

Supply Chain Planning Software 246

Supply Chain Planning Software Supply Chain Software Predictive Analytics Software Manufacturing Procurement 246

GlobalTranz

NOVEMBER 16, 2015

If you are a regular reader of the Cerasis blog, you know our goal is to educate and inform those in the manufacturing, supply chain, distribution, logistics, and transportation space with best practices, trends, and industry news so that we can create a community of people. 20 Manufacturing Blogs You Need to Be Reading.

Supply Chain Design Software 120

Supply Chain Design Software Logistics Network Optimization Software Manufacturing Supply Chain Software 120

Kanban Logistics

SEPTEMBER 9, 2021

The past few years have been quite the rollercoaster for manufacturers. In this article, we’ll look at the latest reports on manufacturing activity, while showing how a third-party logistics (3PL) provider can offer great logistics benefits within the manufacturing industry. in August (values over 50 indicate growth).

Manufacturing Procurement 52

Manufacturing Procurement Procurement Analytics 3PL Logistics Network Optimization Software 52

The Logistics & Supply Chain Management Society

JANUARY 3, 2024

We have heard that there is a focus on near-shoring, reshoring, and local manufacturing. Building a fab (manufacturing site) takes two-to-four years and requires the availability of water and trained labor.” This article by Lora Cecere of Supply Chain Insights was a finalist of the Supply Chain Brief MVP Awards 2022.

Supply Chain Design Software 130

Supply Chain Design Software Supply Chain Planning Software Supply Chain Design Supply Chain Software 130

RFgen

AUGUST 14, 2017

These counterfeits featured markings normally found on legitimate parts from “approximately 35 major electronics manufacturers, including Motorola, Xilinx, and National Semiconductor.” This article will examine the scale of the counterfeit parts problem and what’s changed in acquisition regulations to try to address it.

Aerospace 52

Aerospace Manufacturing Procurement Supply Chain Design Software Supply Chain Planning Software 52

Arena Solutions

DECEMBER 12, 2023

Getting high-quality, compliant products to market is a long and arduous journey for most manufacturers. Regardless of the business, today’s manufacturers are under pressure to innovate faster and gain first-mover advantages while operating under the constraints of stringent regulatory requirements and greater product complexity.

Supply Chain Design Software 109

Supply Chain Design Software Supply Chain Software Demand Planning Software Innovation 109

Supply Chain Game Changer

NOVEMBER 18, 2018

Article created and contributed by Tony Giovaniello, President of Shasta EDC. All of this is creating an amazing amount of opportunity creating more efficient supply chains, new product types, de-centralized manufacturing schemes, and easier approaches to mass-customization. Subscribe Here! Email Address. Existing Case Studies.

Supply Chain Design Software 48

Supply Chain Design Software Supply Chain Planning Software Supply Chain Software Cost Reduction Strategies 48

Logistics Viewpoints

NOVEMBER 20, 2020

And according to the same BBC article, Australia’s former Prime Minister Malcolm Turnbull referred stated, “ There’ll be some hoopla about the signing and the entry into force of RCEP. ” Despite the agreement’s massive scale, tariff changes are expected to be adopted over the next 20 years.

Logistics Network Optimization Software 130

Logistics Network Optimization Software Logistics South Korea New York City 130

The Logistics & Supply Chain Management Society

DECEMBER 21, 2021

By the end of 2022, half of all manufacturing supply chains will see the benefits of supply chain resiliency, resulting in a 10% reduction in disruption impact. Holmes worked at the Singapore Institute of Manufacturing Technology (SIMTech). The COVID-19 pandemic has been global, with no country or organization immune from its impact.

Predictive Analytics Software 246

Predictive Analytics Software Supply Chain Design Software Supply Chain Planning Software Supply Chain Software 246

Arena Solutions

MARCH 19, 2024

In aerospace and defense (A&D) there’s little room for error. Manufacturers must constantly refine their quality measures to navigate these complexities and reduce the risk of catastrophic failures. Today’s A&D products are more sophisticated than ever, incorporating intricate electronics, materials, and digitized systems.

Aerospace 92

Aerospace Supply Chain Design Software Supply Chain Planning Software Manufacturing Procurement 92

Supply Chain Opz

SEPTEMBER 15, 2013

During the period of slow economic growth, many manufacturers have to deal with the cost pressure. In this article, we will explain to you 7 cost saving ideas that you can learn from the space program. We try very hard to find how he does it but it''s very difficult because there is no article dedicated to this.

Material Savings 207

Material Savings Cost Reduction Strategies Supply Chain Design Software Expense Reduction 207

IQMS

FEBRUARY 25, 2021

Bottom Line: Unpredictable demand swings caused by the pandemic are stress-testing supply chain management software systems across manufacturing, helping many manufacturers discover new strengths they hadn’t realize they had before. ” (based on an interview with a Plastics & Rubber Products manufacturer).

Supply Chain Planning Software 66

Supply Chain Planning Software Supply Chain Design Software Supply Chain Software Demand Planning Software 66

Resilinc

JULY 18, 2023

As waves of lawsuits are filed against PFAS manufacturers like 3M and DuPont, businesses and consumers are raising questions about safety and health concerns. Because PFAS were manufactured by scientists, they don’t exist naturally and cannot break down on their own. There’s another place where PFAS can be found, too—our supply chains.

Supply Chain Planning 62

Supply Chain Planning Chemicals Supply Chain United States 62

QAD

JUNE 29, 2023

As I mentioned in a recent article in Quality Digest , prevention is cheaper than playing quality catch-up. This means involving stakeholders from across the company, including engineering, manufacturing, procurement, quality, maintainability, serviceability and sustainability, plus key suppliers. So why doesn’t everybody do it?

Price Reduction 94

Price Reduction Sourcing Strategies Expense Reduction Resource Reduction 94

Kanban Logistics

AUGUST 13, 2020

If you’re a manufacturer, you likely know the answer. See, there’s a big difference between handling inbound logistics yourself and outsourcing it to a trusted North Carolina third-party logistics (3PL) provider that knows the manufacturing industry. Why don’t manufacturers just kit their own parts?”. What is inbound logistics?

3PL 98

3PL Manufacturing Procurement Logistics Network Optimization Software Material Savings 98

The Logistics & Supply Chain Management Society

JULY 22, 2020

Extensive experience in Manufacturing, Aerospace, Automotive, Retail, Heavy Industries, Pharmaceuticals, Mining, Oil & Gas. Awarded 2017 APICS Leadership Excellence Award for a major transformation program with Schindler. Proven Crisis Management experience in Turnaround & Recovery projects at leading global organizations.

Supply Chain Software 147

Supply Chain Software Modeling Pharmaceutical Agile and Lean Supply Chain 147

Kinaxis

JUNE 20, 2016

In a 2014 study, 46% of manufacturing executives didn’t know what the internet of things was. Last year, Deloitte University Press published an article on the Internet of Things titled “Forging links into loops: The Internet of Things’ potential to recast supply chain management”. Needless to say we had scrap issues on a hot day.

Internet of things 188

Internet of things Supply Chain Planning Software Supply Chain Software Supply Chain Planning 188

Arena Solutions

NOVEMBER 2, 2021

This is a common dilemma for most aerospace and defense companies, as they try to keep up with today’s ever-changing industry standards. During that time, I implemented the PLM software solution for over 100 customers across many industries, including medical device manufacturing, defense, high tech, and consumer electronics.

Supply Chain Design Software 84

Supply Chain Design Software Meeting Supply Chain Network Software Modeling Software 84

Kinaxis

NOVEMBER 18, 2015

I also discovered, from an article the Guardian that the U. The drug manufacturer, Aprecia Pharmaceuticals, uses 3D printing to create a more porous pill. 3D printing has gone from a novelty to a serious industry, a predicted $16 billion industry by 2018 according to Canalys as stated in another article from the Guardian.

Supply Chain Design Software 120

Supply Chain Design Software Pharmaceutical Supply Chain Design Modeling 120

NC State SCRC

FEBRUARY 27, 2023

I had the pleasure of speaking with Peter Guinto, who is the President of Government, Defense and Aerospace Business at Resilinc about the ‘art’ of managing supply chains in a volatile environment. Action is needed to verify multi-tier supplier networks and map out the risk associated with lower-tier suppliers.

Modeling 52

Modeling Scenario Planning Supply Chain Planning Software Supply Chain Network Software 52

NC State SCRC

DECEMBER 27, 2023

Changing the way people buy apparel Matthew Wallace has worked in a number of apparel management roles over his career, including as a Senior Director of Sourcing for Merchandising at Walmart, a senior VP at apparel manufacturer PVH (which owns Tommy Hilfiger and Calvin Klein), and currently the CEO of Project DXM (Digital Xpress Model).

Modeling Software 52

Modeling Software Demand Planning Software Apparel Supply Chain Software 52

RFgen

FEBRUARY 7, 2019

In this article, we will explore how maintenance, repair and operations/overhaul (MRO) can benefit from digital transformation, including: Why you should digitize your MRO and enterprise asset management (EAM) practices. And when equipment breaks down unexpectedly, your manufacturing operation can be hemorrhaging money by the second.

Supply Chain Planning Software 52

Supply Chain Planning Software Supply Chain Design Software Inventory Management Software Predictive Analytics Software 52

Resilinc

JANUARY 31, 2022

manufacturing facilities. And the largest net jump in jobs forecast came in computer and electronics due mostly to investment in semiconductor manufacturing such as Taiwan-based TSMC’s $12 billion investment in a 5nm node fab in Phoenix, Arizona. In Europe, FDI in manufacturing declined by 20% in 2020, according to EY.

Agile and Lean Supply Chain 62

Agile and Lean Supply Chain Supply Chain Software Supply Chain Optimization Supply Chain Strategy 62

E2open

JULY 26, 2017

So too is the evolution from internal to external collaboration processes as Excel is ill-suited to bring together demand information from channel partners and supply information from material suppliers and contract manufacturers. This article originally published in Consumer Goods Technology. Aerospace & Defense. Oil & Gas.

Supply and Demand 68

Supply and Demand Supply Chain Planning Software Supply Chain Planning Scenario Planning 68

DELMIA Quintiq

JULY 23, 2021

Article from DS Compass Magazine: Optimizing logistics through digitalization DELMIA’s “Global Operations on the Go” podcast brings you first-hand accounts and insight from our experts and thought-leaders from all around the world. Read the article. Additive Manufacturing: New output format. Manufacturing Operations Management.

Optimization Software 156

Optimization Software Logistics Network Optimization Software Aerospace Lean 156

DELMIA Quintiq

AUGUST 6, 2021

Webinar: Optimize forecasting and production capacity for cable and wire industry manufacturers. The continued growth in the cable and wire business sector will not only increase market value for individual companies, it will also increase the pressure on manufacturing operations, which includes supply chains. Watch the webinar.

Supply Chain Planning Software 31

Supply Chain Planning Software Forecasting Software Inventory Reduction Optimization Software 31

HICX Solutions

SEPTEMBER 8, 2022

According to a survey conducted by HICX, a supplier experience platform provider, 61% of suppliers are struggling to put their best foot forward for major manufacturers, presenting an opportunity for brands to improve supplier experience and boost competitiveness. Read full article. HICX surveyed 500 suppliers from the U.S.,

Survey 52

Survey Manufacturing Aerospace Canada 52

Synovos

APRIL 3, 2018

The article, bylined by the founder and CEO of an industry service provider, details how healthcare providers are, more and more, using barcode technology to “track and trace” medical supplies from the “point of receipt, to the patient.”. Which brings us to the second item, an article about the Internet of Things (IoT).

Supply Chain Planning Software 49

Supply Chain Planning Software Supply Chain Software Supply Chain Planning Internet of things 49

Kanban Logistics

JUNE 10, 2021

In this article, we’ll take a closer look at the current challenges and provide tips on what you can do to address labor challenges. A recent article in Logistics Management examines the current challenges that companies are facing in attracting, hiring and retaining warehouse employees. A pre-COVID U.S. in 2019 – before the pandemic.

Warehousing 52

Warehousing Buyer Training Agile and Lean Supply Chain 3PL 52

QAD

MAY 30, 2023

In this episode, we meet up with Jovani Gonzalez , Chief Financial Officer of Acument Global Technologies to discover how Acument and its fasteners are making the leap from combustion vehicles and aerospace applications to EVs with a “fail fast” mentality. “One If] you’re bringing manufacturing back. Plus, reshoring takes time. “We

Supply Chain Planning Software 98

Supply Chain Planning Software Supply Chain Software Supply Chain Planning Supply Chain Strategy 98

Vinculum

AUGUST 30, 2022

In this article, you will briefly learn about the best ERP systems in Malaysia and Singapore. Epicor deals in providing Manufacturing solutions. As per the report, manufacturing companies top the list for accessing ERP software. Best ERP Systems for Small and Medium Scale Enterprises. It provides two industry-.

Malaysia 52

Malaysia Supply Chain Planning Software Inventory Management Software Optimization Software 52

Resilinc

JANUARY 2, 2024

Resilinc’s President of Government, Defense, and Aerospace, Peter Guinto, provides insight into what’s top of mind for Aerospace and Defense supply chains. In 2023, there was a resurgence in demand within the aerospace and defense (A&D) industry, according to Deloitte. Number two is rapid geopolitical change.

Aerospace 61

Aerospace Supply and Demand Demand Planning Software Supply Chain Software 61

GlobalTranz

MARCH 29, 2016

Editor's Note : This is a guest blog from Valco Valley Tool & Die , a complete metal parts manufacturing house with a proud history of quality products, service and performance. Like Valco Valley Tool & Die, we are ardent readers of the manufacturing industry and blogosphere. The Top 20 Manufacturing Industry Blogs.

Manufacturing 120

Manufacturing Resource Reduction Ohio Michigan 120

Supply Chain Collaborator

JUNE 30, 2017

An article on this grand competition appearing in the New York Times offers the astute observation that each competitor is furiously working to replace its comparative weaknesses with advantageous practices cribbed from the other.

Logistics Network Optimization Software 60

Logistics Network Optimization Software Supply Chain Software Supply Chain Network Software Optimization Software 60

NC State SCRC

APRIL 12, 2023

Here is another blog post from Rajinder Bhandal… I had another wonderful opportunity to catch up with Peter Guinto , the President of Government, Defense and Aerospace Business at Resilinc , to talk further on the subject of contested logistics planning.

Manufacturing Procurement 40

Manufacturing Procurement Supply Chain Planning Software Ukraine Supply Chain Planning 40

Supply Chain Movement

AUGUST 28, 2015

We’ve read the articles and watched the TV stories. By Antony Bourne, global manufacturing industry director at IFS. 3D printing is much bigger than its hype and it’s already a part of today’s manufacturing business. So how can manufacturers ensure they are purchasing genuine replacement parts for industrial equipment?

Manufacturing Procurement 60

Manufacturing Procurement Supply Chain Planning Software Forecasting Software Demand Planning Software 60