RFgen

MAY 24, 2018

Aerospace manufacturers fave a variety of challenges moving forward. Aerospace manufacturers have long had to grapple with a combination of complex workflows, tight profit margins, and strict regulations. Pressure Escalating in Aerospace Manufacturing. Demand is rising quickly in the aerospace sector.

Aerospace 52

Aerospace Manufacturing Procurement Quality Manufacturing 52

Resilinc

MAY 3, 2022

There are few industries where security requirements are as rigorous and intensive as in aerospace and defense. Both reports underscore the importance of training and develop a domestic workforce capable of staffing aerospace and defense industries.

Aerospace 62

Aerospace Security Negotiating Skills Manufacturing Procurement 62

Kanban Logistics

SEPTEMBER 9, 2021

The past few years have been quite the rollercoaster for manufacturers. In this article, we’ll look at the latest reports on manufacturing activity, while showing how a third-party logistics (3PL) provider can offer great logistics benefits within the manufacturing industry. Third-party procurement. Kitting services.

Manufacturing Procurement 52

Manufacturing Procurement Procurement Analytics 3PL Logistics Network Optimization Software 52

The Logistics & Supply Chain Management Society

APRIL 15, 2021

The impact was across manufacturing plants, transport networks, warehouses, and retail outlets. Our analysis of digital and non-digital manufacturers over time shows an index of profit performance, with digital manufacturers outpacing their peers (Figure 1). Source: IDC 2021—Digital Analysis: Manufacturing.

Supply Chain Planning Software 246

Supply Chain Planning Software Supply Chain Software Predictive Analytics Software Manufacturing Procurement 246

GlobalTranz

OCTOBER 9, 2015

The advancements in 3D printing and 'Additive Manufacturing,' coupled with supply chain efficiencies, could make distributed manufacturing a reality, ushering in the era of smart manufacturing. The Continual Coverage and Now Reality of Smart Manufacturing with 3D Printing.

Manufacturing Procurement 120

Manufacturing Procurement Supply Chain Planning Software Supply Chain Software Alloy 120

NC State SCRC

APRIL 3, 2019

Our third contract research paper is by James Wilkinson, focusing on aerospace contracts which typically entail a great deal of risk (as illustrated by the Boeing 737 MAX incident…). The type of contract of interest in this report is for Development and Manufacture contracts in the Aerospace and Defense industries.

Aerospace 40

Aerospace Manufacturing Procurement Supply Chain Design Software Manufacturing 40

IQMS

AUGUST 9, 2019

By 2023, 30% of manufacturing companies with more than $5B in revenue will have implemented Industry 4.0 Blockchain’s greatest potential to deliver business value is in manufacturing. provide valuable insights into how blockchain can improve supply chains and manufacturing. A copy of the study is available here (PDF, 32 pp.,

Manufacturing Procurement 48

Manufacturing Procurement Optimal Sourcing Manufacturing Pharmaceutical 48

Resilinc

APRIL 8, 2024

Taiwan is the global leader in semiconductor manufacturing, producing over 60% of the world’s semiconductors and over 90% of the most advanced chips. The majority of advanced chips are made by the Taiwan Semiconductor Manufacturing Company (TSMC), which makes chips for Apple and Nvidia.

Taiwan 94

Taiwan Supply Chain Software Manufacturing Procurement Supply Chain 94

RFgen

OCTOBER 5, 2018

Today, aerospace firms looking to service the American military must maintain traceability standards that comply with its unforgiving part validation requirements, which can be found in the Defense Federal Acquisition Regulation Supplement. Traceability is an imperative concern for modern aerospace organizations. RFgen can help.

Aerospace 52

Aerospace Manufacturing Procurement Supply Chain Planning Software Military 52

Supply Chain Matters

MARCH 4, 2024

Boeing spun out this supplier, which was once a part of this plane maker’s internal production in 2005 in a major strategic sourcing move. The post Boeing’s Potential Sourcing Reversal- Financial or Operational? Bob Ferrari © Copyright 2024, The Ferrari Consulting and Research Group and the Supply Chain Matters® blog.

Manufacturing Procurement 52

Manufacturing Procurement Sourcing Strategies Optimal Sourcing Sourcing 52

Resilinc

APRIL 30, 2024

Learn more about the most significant extreme weather and climate-related risks procurement professionals should pay attention to in 2024: How Will Climate Change Impact Supply Chains in 2024? 1 Production delays Manufacturing facilities in the hurricane’s path may be damaged or forced to close, leading to production delays or stoppages.

Supply Chain Software 94

Supply Chain Software Supply Chain How To Forecasting 94

Resilinc

APRIL 11, 2023

Overall, EventWatch AI sent alerts for over 15,000 events – pulling data from 104 million news sources across 100 languages and countries. Of these events, nearly 60% impacted Resilinc’s customers and their suppliers which operate across major industries such as automotive, hi-tech, aerospace, and healthcare.

Real-time Visibility 62

Real-time Visibility Manufacturing Procurement Sourcing Strategies Sourcing 62

Supply Chain Matters

DECEMBER 4, 2023

In our prior highlights and perceptions of September and October published indices , we observed that the numbers once again signaled continued contraction in global manufacturing output and product demand levels. Global Wide Manufacturing Activity Levels Global manufacturing activity as reported by the J.P. in November.

Procurement Analytics 59

Procurement Analytics Manufacturing Procurement Report Global 59

Kanban Logistics

AUGUST 13, 2020

If you’re a manufacturer, you likely know the answer. See, there’s a big difference between handling inbound logistics yourself and outsourcing it to a trusted North Carolina third-party logistics (3PL) provider that knows the manufacturing industry. Third-party procurement. Third-party procurement services from a 3PL can help.

3PL 98

3PL Manufacturing Procurement Logistics Network Optimization Software Material Savings 98

QAD

JUNE 29, 2023

This means involving stakeholders from across the company, including engineering, manufacturing, procurement, quality, maintainability, serviceability and sustainability, plus key suppliers. By addressing these risks upfront, the team can design the product and the manufacturing processes to prevent failures before they even occur.

Price Reduction 92

Price Reduction Sourcing Strategies Expense Reduction Resource Reduction 92

Logility

MAY 24, 2021

Tata Technologies will collaborate with Logility to offer digital supply chain transformation solutions to its customers across Automotive, Industrial Heavy Machinery, Aerospace, Industrial, and Medical devices verticals to help them achieve agility and improved resilience in the new normal. ATLANTA – May 24, 2021 – Logility, Inc.,

Supply Chain Planning Software 130

Supply Chain Planning Software Supply Chain Design Software Logility Supply Chain Software 130

Arena Solutions

DECEMBER 12, 2023

Getting high-quality, compliant products to market is a long and arduous journey for most manufacturers. Regardless of the business, today’s manufacturers are under pressure to innovate faster and gain first-mover advantages while operating under the constraints of stringent regulatory requirements and greater product complexity.

Supply Chain Design Software 109

Supply Chain Design Software Supply Chain Software Demand Planning Software Innovation 109

Kinaxis

JULY 18, 2014

I spread my Supply Chain wings at an Aerospace company and since Aerospace and Defense is a key vertical market for Kinaxis, the recent Supply Chain Metrics That Matter: A Focus on Aerospace & Defense report was downloaded on my laptop to read on my next flight. Think about those design, sourcing and delivery challenges.

Supply Chain Planning 224

Supply Chain Planning Supply Chain Design Aerospace Supply Chain Strategy 224

Supply Chain Shaman

JUNE 14, 2018

A slight change within a function–in sourcing or manufacturing, or along the chain–can greatly impact the outcomes of cost, customer service, or working capital. Today’s supply chain—with greater outsourcing, global manufacturing, and complex bill of materials–requires synchronization of the links.

Optimal Sourcing 171

Optimal Sourcing Manufacturing Procurement Supply Chain Planning Software Agile and Lean Supply Chain 171

RFgen

OCTOBER 5, 2018

Today, aerospace firms looking to service the American military must maintain traceability standards that comply with its unforgiving part validation requirements, which can be found in the Defense Federal Acquisition Regulation Supplement. Traceability is an imperative concern for modern aerospace organizations. RFgen can help.

Aerospace 40

Aerospace Manufacturing Procurement Supply Chain Planning Software Military 40

RFgen

AUGUST 14, 2017

These counterfeits featured markings normally found on legitimate parts from “approximately 35 major electronics manufacturers, including Motorola, Xilinx, and National Semiconductor.” Based on its findings, the SASC formed eight conclusions, including: Most counterfeit electronic parts in the defense supply chain are sourced from China.

Aerospace 52

Aerospace Manufacturing Procurement Supply Chain Design Software Supply Chain Planning Software 52

Supply Chain Matters

MARCH 22, 2024

We do so in the lens of supply chain management and manufacturing. While such an application might have been effective, and Procter and Gamble might have been pleased, it is not in conformance with the approved manufacturing process instruction specification for the aircraft. They damage the image of the entire aerospace industry.”

Quality 59

Quality Manufacturing Procurement Alaska Aerospace 59

Bristlecone

AUGUST 18, 2020

To remain competitive in today’s global economy and keep pace with market demand, industries like engineered products, complex assembly manufacturing, and aerospace and defense must continue to innovate and introduce new products. Manufacturing of new products requires the ability to make adjustments and design changes on short notice.

SAP 64

SAP Manufacturing Procurement Aerospace Supply Chain Design Software 64

SupplyOn

SEPTEMBER 3, 2019

More than 750 participants from 51 countries all over the world came to discuss the latest trends in Manufacturing 4.0 and smart manufacturing systems to inventory control and supply chain management (SCM). The post Manufacturing 4.0 from a wide variety of perspectives. Alexandre Dolgui from IMT Atlantique.

Manufacturing Procurement 40

Manufacturing Procurement Conference Rail Software Manufacturing 40

The Logistics & Supply Chain Management Society

DECEMBER 21, 2021

By the end of 2022, half of all manufacturing supply chains will see the benefits of supply chain resiliency, resulting in a 10% reduction in disruption impact. Source: 2021 FUTURE ENTERPRISE RESILIENCY & SPENDING- Wave 9, September 2021. Holmes worked at the Singapore Institute of Manufacturing Technology (SIMTech).

Predictive Analytics Software 246

Predictive Analytics Software Supply Chain Design Software Supply Chain Planning Software Supply Chain Software 246

Kinaxis

MARCH 19, 2018

Accessing what’s beyond our globe has become an accepted source of socio-political promotion. Also included are critical materials such as fuel needed to support renewable energy sources within the spacecraft, oxygen to sustain life and spare parts that may be needed during the mission. Space Logistics and Supply Chain.

Supply Chain Planning Software 235

Supply Chain Planning Software Logistics Network Optimization Software Supply Chain Software Supply Chain Planning 235

Supply Chain Shaman

JUNE 29, 2022

We have heard that there is a focus on near-shoring, reshoring, and local manufacturing. Building a fab (manufacturing site) takes two-to-four years and requires the availability of water and trained labor. Does this solve the problem? When I get this question, I swallow hard. It is such a simplistic view of the world.

Supply Chain Design Software 256

Supply Chain Design Software Supply Chain Planning Software Supply Chain Design Pricing Training 256

ivalua

APRIL 20, 2023

Ivalua, a global leader in spend management , and its partner Axys Consultants today announced that Hutchinson has selected Ivalua’s eProcurement software to expand the scope of its currently implemented solution and meet its evolving procurement requirements. In 2022, it generated a revenue of €4.400 billion. Learn more at www.ivalua.com.

Procurement Solutions 130

Procurement Solutions Optimal Sourcing Manufacturing Procurement Rail Software 130

Supply Chain Matters

FEBRUARY 12, 2024

Manufacturing Employment Impacts Across Europe and the United Kingdom , a significant period of production contraction has led to added manufacturing job losses. With government trade policies favoring more domestic sourcing of deemed strategic supply networks such as semiconductor devices, there are already indications across the U.S.

Negotiating Skills 59

Negotiating Skills Predictive Analytics Software Supply Chain Planning Software Supply Chain Software 59

Resilinc

AUGUST 15, 2023

All these modern products are manufactured using the key commodities germanium and gallium. Unfortunately, China has just issued critical restrictions on these commodities, creating a cause for concern for many businesses and manufacturers in the high-tech and semiconductor space. Do you know what these products have in common?

Manufacturing Procurement 62

Manufacturing Procurement South Korea Predictive Analytics Software Japan 62

The Logistics & Supply Chain Management Society

JANUARY 3, 2024

We have heard that there is a focus on near-shoring, reshoring, and local manufacturing. Building a fab (manufacturing site) takes two-to-four years and requires the availability of water and trained labor.” Does this solve the problem? When I get this question, I swallow hard. It is such a simplistic view of the world.

Supply Chain Design Software 130

Supply Chain Design Software Supply Chain Planning Software Supply Chain Design Supply Chain Software 130

RFgen

OCTOBER 12, 2015

The aerospace and defense industry needs a reliable supply chain. Oversight is critical because sometimes companies defraud government contracts by including counterfeit parts in manufacturing orders. When manufacturers produce medical equipment or commercial vehicles with counterfeit parts, it could put consumers at risk.

Aerospace 52

Aerospace Supply Chain Software Manufacturing Procurement Industrial 52

RFgen

OCTOBER 12, 2015

The aerospace and defense industry needs a reliable supply chain. Oversight is critical because sometimes companies defraud government contracts by including counterfeit parts in manufacturing orders. When manufacturers produce medical equipment or commercial vehicles with counterfeit parts, it could put consumers at risk.

Aerospace 52

Aerospace Supply Chain Software Manufacturing Procurement Industrial 52

DynaSys

DECEMBER 17, 2019

Some publications focus on the recycling aspect, others on carbon emissions and others on sustainable sourcing. In this post, I want to describe two ways in which manufacturers may be impacted. Sustainable Sourcing. Chronologically, raw material sourcing is a logical starting point in the circular supply chain discussion.

Manufacturing Procurement 54

Manufacturing Procurement Pharmaceutical Supply Chain Design Software Supply Chain Design 54

Supply Chain Matters

JUNE 24, 2023

In a prior Supply Chain Matters blog commentary published on Monday of this week , we highlighted that commercial aircraft fuselage, structural component, and engine pylon supplier Spirit AeroSystems has reached a tentative agreement in labor contract renewal talks with the International Association of Machinists and Aerospace Workers (IAM).

Wichita 52

Wichita Aerospace Kansas Manufacturing Procurement 52

Arena Solutions

OCTOBER 12, 2023

If you’re a product developer, manufacturer, or part of an engineering team, you know the excitement, challenge, and profitability that come from transforming an idea into an actual product. In 2022 alone, the global aerospace and defense market size has grown from $795.92 Cited Sources [link]. billion to $855.62

Quality 88

Quality Sourcing Strategies Supply Chain Planning Software Manufacturing Procurement 88

HICX Solutions

NOVEMBER 10, 2022

David describes himself as a ‘pracademic,’ or practitioner academic, having held various global CPO roles across a number of industries, including retail, FMCG, pharmaceuticals, aerospace and defense, manufacturing, and banking. Adoption challenges and future of Procurement. An alternative approach to digital transformation. “The

Supply Chain Planning Software 52

Supply Chain Planning Software Manufacturing Procurement Pharmaceutical Procurement 52